Fluid Audio

C5BT Pair

C5BT

 
 
 
 
 
 

FLUID AUDIO C5BT Pair - €215,00 NEW

Bluetooth Series!

C5BT is an affordable Bluetooth enabled monitor using the newest CSR BT 4.0 technology with aptX® support. aptX® has revolutionized the Bluetooth® Stereo listening experience by significantly reducing the bit rate without affecting audio quality or introducing latency issues. With a bit-rate of 384 kbit/s @ 16/48kHz, the aptX audio codec source material is transparently delivered over the Bluetooth link, whether it is stored uncompressed or in an alternative compression (MP3, AAC, FLAC) format.

The C5BT features a 5-inch low frequency transducer and a 1-inch PEI diaphragm tweeter mounted to a specially designed waveguide to create a better off-axis response.

The top panel sports the digital volume control, Bluetooth pairing button and input selector.

The rear panel houses the round bass-reflex port and hosts balanced ¼” TRS, unbalanced RCA inputs, unbalanced RCA subwoofer output and optical toslink connection.

Protection features include RF interference, output current limiting, over-temperature, turn-on/off transient and subsonic filter protection.

Features:
  • - Frequency response: 54 Hz – 22 kHz (+/-3dB)
    - Crossover frequency: 4.5 kHz
    - Amplifier power: 2 x 20 watts (40W total)
    - Signal-to-noise: > 90 dB (typical A-weighted)
    - Polarity: Positive signal at + input produces outward LF one displacement
    - Input impedance: 20 k ohms balanced, 10 k ohms unbalanced
    - Input sensitivity: 85 mV pink noise input produces 85dBA output SPL @ one meter with volume control at maximum (97dB Max SPL)
    - Power: Fixed 110V ~50/60 Hz or 220V~50/60 Hz
    - Protection: RF interference, output current limiting, over temperature, turn-on/off transient and subsonic filter
    - Cabinet: Vinyl-laminated MDF
    - Size (single monitor): 256 x 174 x 193 mm (HxWxD)
    - Weight (pair monitors): 19.4 lbs. / 8.8 kg

SKU c5bt
€209.58
(Incl. 16% tax)
1 In Stock


 

F4 Pair

FluidAudioF4 Paar

 
 
 
 
 
 
 
 

FLUID AUDIO F4 Pair - €149,00 NEW

The Fluid Audio F4 is the perfect entry level near-field monitor for the aspiring musician or seasoned Pro. That's not to say this is not a professional monitor, however. One can look at it as just a shrunken down F5 – as it uses the same silk dome tweeter and waveguide.  The same amount of time and effort that went into our bigger models was invested in the F4 as well. The result: Great imaging, clear articulate midrange and ample bass that doesn't muddy up the vocals. That is the hallmark of the Fluid Audio sound, and will help you pinpoint exactly what you want to create in your audio landscape.

Being the smallest of the family has its advantages, too... like convenience. Its compact size allows for flexible placement, whether you're mixing your album on a smaller console or video editing on a small desk – the F4 provides professional, studio sound quality in any environment.

Including TRS and RCA inputs on the amplifier panel, there is also an Aux input and headphone output on the front baffle. The amp also uses an external heat sink to keep the amp running cool, as well as the standby circuit that conserves power when the amp is not being used.  As with all Fader Series speakers, there is also the convenient fader volume control on the front baffle, to save you from reaching around to the back of the amp to adjust the volume level.

All of these features come together to create a great sounding yet transparent listening and mixing experience...at a great price.

Features:
  • - Frequency response: 69 Hz – 22 kHz (+/-3dB)< Crossover frequency: 2.5 kHz
    - Amplifier power: 2 x 15 watts
    - Signal-to-noise: > 90 dB (typical A-weighted)
    - Polarity: Positive signal at + input produces outward LF one displacement
    - Input impedance: 20 k ohms balanced, 10 k ohms unbalanced
    - Input sensitivity: 85 mV pink noise input produces 74dBA output SPL @ one meter with volume control at maximum
    - Power: Fixed 110V ~50/60 Hz or 220V~50/60 Hz
    - Protection: RF interference, output current limiting, over temperature, turn-on/off transient and subsonic filter
    - Cabinet: Vinyl-laminated MDF
    - Size (single monitor): 222 x 150 x 172 mm (HxWxD)
    - Weight (pair monitors): 15 lbs / 6.8 kg

SKU faf4
€145.24
(Incl. 16% tax)
1 In Stock


 

F5 Pair

 FluidAudioF5 Paar

 
 
 
 
 
 
 
 
 

FLUID AUDIO F5 Pair - €195,00 NEW

The F5 studio monitor is the model that started it all for Fluid Audio. When we decided to enter this market, we wanted to address many of the issues found with monitors at this price point. We didn't realize that so many others would want the very same thing! Fluid Audio's remarkably affordable F5 monitor brings a lot of technology and value to the table. The amplifier rear panel has not only XLR and TRS inputs for more professional applications, we have also included an RCA input for more "consumer friendly" applications. The amplifier has a generous heat sink for long mixing sessions. Most monitors have their amp heat sinks inside the cabinet where all the heat is generated and cannot escape. The F5 amplifier ICs are mounted directly to the heat sink, so heat can transmit harmlessly away from the drivers and internal circuitry. The amp also has something no other monitor in its class can boast - A standby circuit that shuts down the amp after 20 mins of non use. This may not seem like much of a feature, but we are all concerned with being "green" and conserving energy in this day and age. This is our small contribution.

While the amplifier is extremely important, all of the sound radiates from the front baffle, where the drivers and port are mounted. The woofer uses a paper pulp composite cone, which has a curve-linear geometry and is mounted to a well damped butyl rubber surround. All this contributes to a very well controlled woofer response that integrates seamlessly with the tweeter. The tweeter itself is a treated silk material, which means it's very light, very fast and provides just the right amount of articulation and "air" to high frequencies. The tweeter is mounted in a custom designed wave guide that is a perfect balance between optimizing the low end response of the device, and a great off-axis response in the near field. The well reinforced MDF cabinet minimizes resonances, and the front mounted bass-reflex port allows the bass energy to radiate directly towards the listener. And unlike many other monitors in its class, there is a volume control on the front baffle for easy access.

All of these features come together to create a great sounding yet transparent listening and mixing experience...at a great price.

Features:
  • - Frequency response: 49 Hz – 22 kHz (+/-3dB)
    - Crossover frequency: 2.5 kHz
    - Low-frequency amplifier power: 40 watts
    - High-frequency amplifier power: 30 watts
    - Signal-to-noise: > 100 dB (typical A-weighted)
    - Polarity: Positive signal at + input produces outward LF one displacement
    - Input impedance: 20 k ohms balanced, 10 k ohms unbalanced
    - Input sensitivity: 85 mV pink noise input produces 90dBA output SPL @ one meter with volume control at maximum (101dB Max SPL)
    - Power: 115V ~50/60 Hz or 230V~50/60 Hz user switchable
    - Protection: RF interference, output current limiting, over temperature, turn-on/off transient, subsonic filter, external mains fuse
    - Cabinet: Vinyl-laminated MDF
    - Size (single monitor): 10.25” x 6.9” x 7.7” / 260 x 176 x 195 mm
    - Weight (pair): 22 lbs / 10 kg

SKU faf5
€190.08
(Incl. 16% tax)
1 In Stock


 

FX50

FluidAudioFX50

 
 
 
 
 
 
 

FLUID AUDIO FX50 - €149,00 NEW

Introducing our new FX series of coaxial studio monitors.
Keeping true to the original "keyhole" design, the FX enclosure has been updated with a complex radius front baffle, which not only looks pretty cool, it improves cabinet defraction.

Coaxial driver
Mounted in the center of the woofer is a 25mm silk dome tweeter in a coaxial configuration. Using this technology (unique in its price range) makes it a "point source" device, meaning that all the sound emanates from a single point - not points that are 10" apart. This is crucial for improving off-axis response, but also allows for a more compact footprint cabinet.

Boundary compensation DIP switches
Sometimes the spaces where we mix aren't the most forgiving acoustically (especially if you're in a home studio).
The FX series monitors come equipped with boundary control EQ switches, that allow you to compensate for spaces that may not have been "tuned" or just need to be adjusted due to their proximity to the wall behind them. There is also a guide conveniently printed on the rear panel to show how the DIP switches work, and a more detailed explanation in the user guide.

Front-loaded slot port design
The bass-reflex slot port tunes the cabinet to maximize the bass output efficiency of the speaker. It is placed on the front panel not only to directly radiate the bass energy towards the listener, but also for flexibility of placement in your studio.

Updated Tweeter Grille protection
The FX coax design, with the tweeter suspended in the middle of the woofer,
is very robust. As such, it provides outstanding protection for the woofer itself. However, the tweeter needs protection as well, this is why we added a small, steel perforated grille to protect the delicate silk diaphragm of the tweeter.

"Imaging and Depth"
It's one thing to put high quality speaker drivers in a cabinet with an amplifier and call it a great speaker. But for a transparent reference monitor, that is only the beginning. 

Painstaking crossover design and listening sessions were undertaken to optimize not only a flat on-axis frequency response, but a depth of soundstage that has become the hallmark of Fluid Audio monitors.
This ensures that your mix will not only sound great on your FX speakers, but will translate to speaker systems outside the studio as well.

Features:
  • - Frequency response: 49Hz – 22KHz (+/- 3db)
    - Crossover frequency: 2.9KHz
    - Low-frequency amplifier power: 50 watts
    - High-frequency amplifier power: 40 watts
    - Signal-to-noise: 89dB (typical A-weighted)
    - Polarity: Positive signal at + input produces outward LF one displacement
    - Input impedance: 20 k ohms balanced, 10 k ohms unbalanced
    - Input sensitivity: 85 mV pink noise input produces TBD dB output 89dBA @ one meter with volume control at maximum
    - Power: 100V - 240V~50/60 Hz
    - Protection: RF interference, output current limiting, over temperature, turn-on/off transient, subsonic filter, external mains fuse
    - Cabinet: Vinyl-laminated MDF
    - Size (single monitor): 9.21*6.93*9.0 / 234mm x 176mm x 230mm
    - Weight (each): 8.15lbs / 3.8kg

SKU fafx50
€145.24
(Incl. 16% tax)
Out of stock


 

Business Partners Wanted!

Public Peace is looking for partners in different countries interested in selling our products. If you feel adressed, just get in contact with Adrian Maruszczyk:
This email address is being protected from spambots. You need JavaScript enabled to view it.

Login

Login